F/S: Canton 7 qt oil pan for 96-04 4.6/5.4

[bullitt4882]

PLEASE READ THE WHOLE AD

Selling this canton oil pan I took off a 97 turbo cobra. Looks like they had some jb weld or something on the front oil tap. So I welded it from the inside of the pan and ground it down so that should fix any leakage from that. If you don't need the front oil tap you can obviously cap it. Otherwise nothing wrong. Was dirty/ oxidized so I just hit it with some primer. You can paint as you please. They are $315 or so new plus shipping.

I'm asking $125 shipped.
Have plenty of pics just text for them. For some reason tapatalk won't let me upload.
I will ship promptly upon payment.

My PayPal is [email protected]
You can text my cell at 203-695-2351

Please, if not sending payment as gift include the fees.

 

[bullitt4882]

https://db.tt/EQ1mWNfW
https://db.tt/xf6qHPET
https://db.tt/TilbYktq
https://db.tt/FRH4H6CA
https://db.tt/i6GS9Csq
https://db.tt/N9oyHH9V
https://db.tt/Eh49h27U

 

[V8_Kind_Of_Guy]

Do you know if that oil pan will fit with the factory k member? Do you have the part number?

 

[bullitt4882]

Yes it is supposed to. I do not have a part number but you can easily find it on any of the mustang sites. Americanmuscle.com, cj pony parts lethal performance etc

 

[V8_Kind_Of_Guy]

ok thanks. i just wanted the part number to check some stuff out like is it for a swap, etc. This is my first 4v build and slowly learning the ins and outs. Ill send you a pm in a few and set something up.

 

[bullitt4882]

Ok no I'll try n find a link for you. It's for pretty much any 96-04 4.6

 

[bullitt4882]

I pulled it off a 97 cobra

 

[330mach1]

Sold?

 

[bullitt4882]

Yes sold guys thanks!