F/S: $800 IRS upper/lower arms w/ full tilt boogie installed plus free bushing kit

[carrew]

Contact
PM
or
Email cc027999-1911cg at yahoo dot com

Plus I will throw in a new set of Full Tilt Boogie Subframe Bushing kit ($120) for Free http://i1266.photobucket.com/albums/jj534/chris_carrew/ftbrsubframe2_zps6dc63588.jpg

03/04 Cobra IRS upper Control arms with Full Tilt Boogie racing Delrin bushing installed and never on car
http://i1266.photobucket.com/albums/jj534/chris_carrew/FTBRuppers2_zpsdab2b400.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/FTBRuppers3_zps351a7e38.jpg

03/04 Cobra IRS lower control arms with Full Tilt Boogie racing delrin bushings installed and never installed
http://i1266.photobucket.com/albums/jj534/chris_carrew/FTBRlowers1_zps5955a396.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/FTBRlowers2_zpsd01b6714.jpg

 

[carrew]

Need clarify the Lower and upper control arms have the full tilt boogie bushings installed with Zerk Grease fittings. You are buying a the whole control arms, not just the bushing and control arms separate. No trades for your arms, you can sell your stock arms to recoup your cost.

Now the subframe bushing kit is just the bushings in the FTBR bag

I will also throw in New MM low clearance bolts and A Used MM Subframe bushing installer. $50 value for Free with purchase of package above.

FYI I have two cars with IRS's and both fully built. One is under my cobra and the other is being parted out from my fox that I have up for sale. The parts were never installed, I changed my mind in doing the swap. My loss your gain.

This is a heck of deal, it requires a hydraulic press to remove control arm bushings. If you took your arms to a shop you get charged $160 for removal only. Not including have the arms machine drilled for the zerk fittings. So your looking at $300-$400 in labor alone, then add bushing cost of $300, control arm cost $400 , then the Subframe tool and $125 subframe bushings and we are north of $1200. You sell your control arms this package might only cost $400, which is almost cost of the bushings alone

 

[SilverNotch]

I'm interested in these do you still have these?