F/S 2003 Black Cobra, 8500 mile rolling chassis + parts!

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
Rolling Chassis no longer for sale at this time!

I also have the following parts and will be listing them in their appropriate locations!



Hermann spec'd PA built 4r70w trans, manual VB, Trans brake, lock-up, OD; with Precision Industries 4000 stall 3 disk lock-up converter, PA sfi approved flexplate, AODE block plate, and bolts, tranny fluid dipstick, two B&M Super coolers, and Denny's Driveshaft, custom built to length driveshaft (for 8.8 SRA and 4r70w) = $3800 pick-up, or meet up only
Stock 2003 Cobra 4.6 block (probably needs .010-.020 over) = $150 pick-up, or meet up only
Ron Davis HX with twin Spal fans –USED = SOLD
Aluminum front bumper support (stock bumper support included with chassis) = SOLD
Stock steel ’03 Cobra crank = $300 pick-up, or meet up only
Stock ’03 Cobra Manley/SVT rods = $350 shipped
Stock 2003 Cobra heads (complete with all the timing gears, chains, guides, cams, Valve covers, etc.) = $1000 prefer pick-up or meet only
Stock (60K complete and running) 2001 Navigator 5.4 DOHC engine intake to pan = $2000 pick-up or meet only
-Sullivan FI 5.4 lower intake = SOLD
Sullivan upper dual blade TB plenum = $300 shipped
Sullivan polished and clear anodized fuel rails = shipped $185
60 lbs flow matched Siemen Deka fuel injectors = $320 shipped
Meizere Electric water pump slightly used = SOLD
(2) Precision GT35R turbos, surge ported 4" inlet, ported 2.5" discharge, T4 .68 A/R exhaust housing = SOLD
(2) Tial GT35R stainless steel exhaust housings, V-band inlet and outlet connections .82 A/R = $310 each shipped or $600 shipped for both
(2) JGS 50 mm wastegates, with V-band flanges and connections w/ 3 springs = $310 each shipped or $600 shipped for both
1 pair “brand new” of Bare Ford GT/GT500 heads = $1800 shipped
UPR Pro Series Chromoly tubular K member and A-arms brand new = $450 shipped
Maximum Motorsports / Bilstien Coilover set-up USED = SOLD
99-04 "no spoiler, No holes" trunklid (black, but has scratch and needs painted) new tail light included = $200 (prefer pick-up or meet-up)
LFP ’03-’04 Cobra aluminum Radiator, brand new = SOLD
MAC 3” aluminized “Pro-Dump” catback (for solid axle) USED = $175 shipped

Paypal accepted on all shippable items. Please add 3.5% for Paypal payments

Pics available......Please request them with an email address for me to send them to!

Thanks,
Ken
 
Last edited:

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
There are currently 4 persons interested in the auto set-up, and 1 person interested in the two GT35R turbos.....but no pending sales at this time!!
 

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
Electric water pump and aluminum front bumper support are SOLD!

Car will have a stock unmodified center console in it ready for a 6 speed, mine with the shifter plates has been traded out!
 

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
LFP Radiator and Ron Davis heat exchanger SOLD!

Mr. Couper,
I will get picsof the MAC Pro Dumps as soon as possible, I need your email address though!
 

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
Precision GT35R Turbos are SOLD!

Working on getting pics on items to those who have posted and pm'd and have not gotten them yet! (sorry, pics are on my home computer)

Thanks,
Ken
 

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
I'll get pics out when I get home, but I will say right now to everyone the front end is apart, with no suspension, or front bumper cover on it right now! (if bought as a rolling chassis, it would be put together).

Bumper cover is off to protect it, rest of the front suspension/K member/wheels are off from when I was going all new suspension!

At the moment I am not going to put it together, since I am trying to get my hands on a wrecked low mileage engine car to put mine back together complete and almost 100% stock condition!

Thanks,
Ken
 

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
I'd be interested in some of the motor stuff, but you won't ship. :(

Which parts?
I'd probably be willing to ship any of the motor stuff, except the 4.6 block, and the 5.4 engine!

But shipping would need to be added to the listed price!

Ken
 

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
Rolling chassis is no longer for sale at this time!

Seperate list of parts are still available!


Ken
 
Last edited:

Users who are viewing this thread



Top