I'm having problems installing the fronts, the tool I am using uses 2 studs that you torque down. The studs are too long and interfere with the control arm. Can I install these with the spring compressor tool that goes on the inside of the spring?
I'm having problems installing the fronts, the tool I am using uses 2 studs that you torque down. The studs are too long and interfere with the control arm. Can I install these with the spring compressor tool that goes on the inside of the spring?
Place jack under control arm so it keeps tension. Remove all that is connected to the arm. (other than the 2 bolts at the K member)
Slowly release tension on jack, and the spring will fall out.
Reverse for installation.