EGR Tube

[skyhighsd]

Ok so I am finally getting around to changing some things on my car and I pulled the K-member to replace it. Figured no time better to put in the LT's(finally gave in) I bought from Lethal a few weeks back. Everything is out no problem and then I hit the passenger's side. For the guys that changed your own LT's how did you get the EGR nut to break loose on the exhaust manifold? I have soaked it in penetrating oil (Kroil best stuff out there if you ask me) but I just can not get it to break loose with the 1 1/6" th wrench that I had to cut down to get in there with. I am pulling the motor over pretty good so any other idea's would help. Thanks

 

[ZOMBEAST]

Might be better to remove the battery tray and get it from the top.

 

[skyhighsd]

Oh S.O.B. I didnt even think of pulling the tray, good idea I will have to try that later today. I guess it got the better of me yesterday, lol.

 

[Willie2]

+1 on the battery tray

 

[sfadchi]

+2 battery tray worked for me!

 

[Willie2]

you got me thinking....i should have put some koppercote on the threads before i put it all back together!

 

[skyhighsd]

Thanks guys :beer: