Eaton Tvs

[droptop351]

subscribing

 

[Dsg302Snake]

Interesting

 

[Ironhand]

1.9L? We may still get some boost dropoff at that size. It's just not big enough. Now a 2+L TVS would be worth a try. But 1.7 to 1.9?

 

[BlueSS]

Holy Shit! I Wonder How Much It Will Be?

 

[Rick James]

1.9L? We may still get some boost dropoff at that size. It's just not big enough. Now a 2+L TVS would be worth a try. But 1.7 to 1.9?

I see a 2.3 model on the site. :shrug:


DIMENSIONS AND DISPLACEMENT FOR ALL MODELS


Model Displacement A - Min
w/72mm min dia pulley A - Min
less then 72mm dia pulley A
Max B C Minimum recommended displacement application (L) Maximum recommended displacement application (L)
R350 0.35 L/REV 237 252 397 127 99 0.2 0.9
R410 0.41 L/REV 259 274 419 127 99 0.5 1.4
R530 0.53 L/REV 252 267 412 144 109 1 2
R660 0.66 L/REV 281 296 441 144 109 1.3 2.4
R900 0.90 L/REV 278 293 438 165 122 1.5 2.9
R1050 1.05 L/REV 305 320 465 165 122 1.9 3.4
R1320 1.32 L/REV 293 311 453 187 135 2.2 4.2
R1650 1.65 L/REV 331 349 491 187 135 3 5.2
R1900 1.90 L/REV 316 337 476 207 147 3.6 6.6
R2300 2.30 L/REV 352 373 512 207 147 4.3 7.8

 

[oldbones]

It'll be on my car, Yep, it's stock:fm:

 

[ViciousJay]

man oh man.... think of it you could throw a BF or aftermarket pulley on this run 550+ hp and have people think its still a M112 stock or ported eaton

 

[oldbones]

man oh man.... think of it you could throw a BF or aftermarket pulley on this run 550+ hp and have people think its still a M112 stock or ported eaton

That's the plan, I'm sitting at 540rwhp on the stock port blower as it is.:fm:

 

[Yellow2003]

That's the plan, I'm sitting at 540rwhp on the stock port blower as it is.:fm:

+1
My Metco lower goes on Monday.

I would be aiming for the 600+ range with the TVS......

Wanna know the price!!!!

 

[ViciousJay]

+1


Wanna know the price!!!!

my guess is 2K :shrug:

 

[Rick James]

That's the plan, I'm sitting at 540rwhp on the stock port blower as it is.:fm:

How are you at 540rwhp on an unported blower??? Nitrous?

 

[oldbones]

It's a ported Eaton and I've got a built motor, I'm attending a race car engine building school and I know there is a another 30rwhp by changing the pullies to put the blower back in the efficence range.
When I built my motor I built the car for awesome lauches and pullied the blower for that. Now I keep breaking rearends and know that if I can move the powerband up the faster the car will go, plus I can run more gear

 

[Yellow2003]

my guess is 2K :shrug:

That would be VERY attractive.... Something like the 1900 and adapter plate combo for $1995.00 and I would be very tempted:idea:

 

[ViciousJay]

id be more tempted if it was 1500 otherwise ported eaton is staying..

 

[BlueSS]

id be more tempted if it was 1500 otherwise ported eaton is staying..

Definately, if they make this TVS work with our Terminators and set it at a reasonable price, they will make a killing! :rockon: I've been holding off on the twin screw, hopefully they get some test mules/guinea pigs going so we can see what to expect from it! :beer:

 

[ViciousJay]

im up for the challenge

 

[Fuerza]

id be more tempted if it was 1500 otherwise ported eaton is staying..

Yes sir! No way in hell will I upgrade my Eaton for a TVS for more than 1500 bucks. I can still upgrade to a stage 4 port and pulley it more with a lower. Any thing more than 1500 and I'll start looking for a used twin screw.

 

[grey trmn8r]

I read on another forum were someone actually got a reply with a round about estimate at $1500. Oh and another thing Rousch supposedly is using the TVS as their ROUSCHcharger. There's no reason you shouldnt be able to achieve 600+ with this thing.

 

[grey trmn8r]

Also its probably going to be quiter than a whipple

 

[rtusnake]

Damn, one of the reasons I like my ported eaton is the sound