Eagle internals max hp?

[Daryl Mozart]

Wow not to be mean but you don't understand that if you bore your block .020 over you need the same .020 pistons? And once again forget about 10.5 compression Run a low single digit dish for the fourth time...

I might have not mentioned I'm decided to stay N/A.

 

[Nightmare302]

If you are NA keep compression up. Overbore has to do with the bore of the block. Work with your machine shop to decide what size piston you need. Standard bore is if the block can just be honed (almost never possible). Some brands have .010 pistons, almost all have .020 and others have .030 which I would avoid leaves no meat to bore again if the engine has an issue.