E85 Pullied cobra vs e85 Evo 22psi

[lguizar12]

Figured I'd post this here to get some feedback.*

Mods for me are 2.8 pulley, 4lbs lower and bolt ons. On e85
500hp
His are I believe, built motor on 22psi *on a upgraded turbo. His motor can handle 30psi.*
Mid to high 400's

20 roll*

[nomedia="http://www.youtube.com/watch?v=lzXEq7D123k&feature=email"]YouTube - ‪Evo x, Evo 8, 03 Cobra‬‏[/nomedia]

 

[TBCobra]

Nice run.

 

[slverstang]

I cant see the vid...how bad do u get him? I know a stock block on those things can take 30lbs all day with e85.

 

[TBCobra]

Kinda shaky but looked like 2-3 car lengths.

 

[slverstang]

Sounds about right on 22lbs. I raced a 30lbs, E85, cams, full exhaust, built tranny evo 9 and did a 45 roll and he only got me about 1/2 to a car up to 140. Stock motor

Edit: BTW i dont think an evo on only 22lbs is mid to high 400 unless they are running higher compression and e85 even on the built motor. Stock they come with 19lbs

 

[5 ltr. beater]

I cant see the vid...how bad do u get him? I know a stock block on those things can take 30lbs all day with e85.

...like mine! :thumbsup:

 

[5 ltr. beater]

BTW i dont think an evo on only 22lbs is mid to high 400 unless they are running higher compression and e85 even on the built motor. Stock they come with 19lbs

THIS.


other evos with my mods are around the 370-380ish mark. im spiking 31lbs and holding 25-26ish on e85with the stock cams,stock intercooler and stock turbo.

cams and intercooler would put an evo like mine over 400mark, but not on only 22lbs of boost

 

[Black Sex]

Nice kill.
Wait till you run one with built motor/E85/40psi. I got drug from a roll but held him off from a dig :shrug:

 

[slverstang]

THIS.


other evos with my mods are around the 370-380ish mark. im spiking 31lbs and holding 25-26ish on e85with the stock cams,stock intercooler and stock turbo.

cams and intercooler would put an evo like mine over 400mark, but not on only 22lbs of boost

Thats very true. I have a buddy with an evo 9, cams, full exhaust, stock turbo, intake and ams tune. he was like at 380 and at 23 pounds

 

[5 ltr. beater]

Figured I'd post this here to get some feedback.*

Mods for me are 2.8 pulley, 4lbs lower and bolt ons. On e85
500hp
His are I believe, built motor on 22psi *on a upgraded turbo. His motor can handle 30psi.*
Mid to high 400's

20 roll*

YouTube - ‪Evo x, Evo 8, 03 Cobra‬‏

cobra pulls hard man!!! good kill!

 

[JoeyR]

good run and good kill, sad to see the race from another car trailing far behind though.

 

[lguizar12]

Gt3076r turbo, heads, cam, bolt ons , e85, built shortblock. 22psi . there is a lot left in his car.

Yea that's all I know. That camera car was Evo 10 on e85 too. He was racing as well. Not to be cocky but my car pulls hard from low roll on the Hoosiers. I'm At 565 rwtq.

 

[JoeyR]

low rolls are always great if you can hook =D i will never go back to a normal street tire after getting some .DOT drags.

 

[slverstang]

Gt3076r turbo, heads, cam, bolt ons , e85, built shortblock. 22psi . there is a lot left in his car.

Yea that's all I know. That camera car was Evo 10 on e85 too. He was racing as well. Not to be cocky but my car pulls hard from low roll on the Hoosiers. I'm At 565 rwtq.

So he's running a built head as well? why only run 22lbs? hes not even scratching that cat haha

 

[BayareaSS]

Good kill

 

[lguizar12]

So he's running a built head as well? why only run 22lbs? hes not even scratching that cat haha

Yea I don't talk to the dude so I don't know .

 

[slverstang]

Great kill for sure though!

 

[derockgt]

nice kill

 

[lguizar12]

Thanks guys

 

[steadyimpact]

Nice kill