Dyno time saturday, guess my numbers.

[Kyle_KleinSS]

Ok guys now that I am all done with my build I will be hitting the dyno saturday. I am running a johnny port with a 2.8/4lb with 80s and a fore level 2. I set up the car for e85 but this first tune will be my 93 tune. More specifics about my build are here. http://www.svtperformance.com/forums/showthread.php?1053641-Finally-started-my-winter-build

So what do you guys think I will make on 93?

 

[b_dike]

505/518

 

[Woody6799]

502/512

 

[stangfreak]

2.8 upper 4lb lower with basic bolt on's on a ported eaton stock manifolds? Im saying 510ish rwhp with 540-550rwtq

 

[Bdubbs]

LOl I'm really not good at this guessing game. Have you been on this dyno before Kyle? Is it conservative or a little happy?

 

[CobraLucci]

Id guess 518/540?

 

[Givens]

519hp 535tq

Should be fun, I'm interested to see what it does on E85

Good luck

 

[Kyle_KleinSS]

Yea same one who did my upper only. Did 455/459 with the 2.8 and o/r x. Im hoping for 5-520 on 93, and 530-550 on the corn.

 

[Oiljunkie]

509/533
540/555 on corn

 

[agwazz]

Same mods here including the Johnny Port. I do have Arh long tubes and picked up 45hp and 65tq on a Mustang dyno(not a happy dyno). My final numbers were 470/503 on 93. It was pulling timing due to high IAT's. I was spinning at 17.5 lbs. Make sure you have a cooling mod. I will also be tuning for e85 soon. Keep us advised....edited below

 

[Bdubbs]

Same mods here including the Johnny Port. I do have Arh long tubes and picked up 45hp and 65tq on a Mustang dyno(not a happy dyno). My final numbers were 470/503 on 93. It was pulling timing due to high IAT's. I was spinning at 17.5 lbs. Make sure you have a cooling mod. I will also be tuning for e85 soon. Keep us advised....

So did you pick up 45hp from the headers or port? Guessing from the port?

 

[agwazz]

Same mods here including the Johnny Port. After adding the Arh long tubes, port and 4lb lower I picked up 45hp and 65tq on a Mustang dyno(not a happy dyno). My final numbers were 470/503 on 93. It was pulling timing due to high IAT's. I was spinning at 17.5 lbs. Make sure you have a cooling mod. I will also be tuning for e85 soon. Keep us advised....

 

[BlksvtCobra01]

500 hp 520 tq 93
530hp 550 tq e85

 

[ViciousJay]

502/514 - 93
523/539 - Corn

 

[Kyle_KleinSS]

I put down 492/525. He said ports are usually between 480-500 on his dyno. This was with 23 degrees. He said there is probably another 40 hp in it with the e85.

 

[Kyle_KleinSS]