Dyno numbers after mods.

Blacksmoke

New Member
Established Member
Joined
Jun 26, 2011
Messages
202
Location
Texas
08 GT500

2.6 pulley and idle pulley
JLT CAI
Dyno tune.

median
528.4HP
533.76Trq

Best
535HP
(forgot Trq was about 537 or 8)

Good numbers for those mods?
 

NightRide

Roll Racer
Established Member
Joined
Mar 29, 2011
Messages
3,439
Location
New Mexico
Seems like pretty typical numbers, for comparison I made 519/521 with a 2.59 upper/tune in the 100 degree texas heat.
 

Blacksmoke

New Member
Established Member
Joined
Jun 26, 2011
Messages
202
Location
Texas
They were great there though.
So very nice and asked me my goals for the vehicle.
Did not try to simply sell me things.

Spend over 2 hrs talking about my goals and how I could achieve them and what I would like to do and what I'd like to stay away from, and got some really good advice.
Fine tuned the car the way I wanted it etc... just an excellent all round experience.
I do regret not getting a baseline dyno run done though.

I must say it was by FAR the best experience I have ever had from a Mustang specialty shop!
 
Last edited:

Blacksmoke

New Member
Established Member
Joined
Jun 26, 2011
Messages
202
Location
Texas
91 or 93 octane? I have similar mods, but no dyno around me and just curious. Stock exhaust?

You really at 640 with your mods?
To the engine of course...or did you get more mods?

What did you dyno at the wheels?
And with what mods? Octane?
 

Phantomhalo

All the boost!
Established Member
Joined
Jun 2, 2013
Messages
1,476
Location
Battle Creek, MI
That was what the power pack claims. It came with the car and tuned to 93. That is at the motor though. Haven't had a chance to get to the dyno because we don't have one anywhere near me unfortunately. I have the lethal off road h pipe as my only other power mod for the moment. Getting suspension done first so I can actually get the power to the ground before getting more.
 

zporta

KB INSIDE
Established Member
Joined
Oct 12, 2009
Messages
6,396
Location
Baltimore
I made 537 with those mods on a 93 octane tune

You numbers look normal, but you will be wanting more in
3....2...1....
 

BIGYUSM

Member
Established Member
Joined
Apr 24, 2013
Messages
94
Location
Valparaiso, IN
Posted 533rhp and 528tq with those and a dyno tune. I put the CAI, Pulley and Plugs in myself with a JLT then Lund tune originally, then got a dyno tune at Brenspeed.
 

Users who are viewing this thread



Top