Dual fpdm + kb BAP

[Sl0w7pt3]

Need some help here ive tried searching all over and find the same info so I'm hoping someone can help out here's my issue.

I recently did the PPRV delete gt40's and KBBAP on stock hat. I ran the kbbap pre fpdm's using wiring diagrams I found on here. each pump is wired into each fpdm. I tripled checked all my work and everything looks good but when I drive the car it studders/hesitates. sometimes it wont pass 3200 rpm. also the kbbap blew its fuse and I notice the kbbap was running hot.... any ideas?!?! thanks a lot in advance!!!!!
any diagrams others have used when running dual fpdm?

 

[ctgreddy]

I'd check it all over with this diagram. I'm going to be using it and seems as most guys have good luck with it.

http://westcoastmustangs.com/articles/tech/dual_fpdm/dual_fpdm.html#modifiedFPDM

 

[Sl0w7pt3]

I'd check it all over with this diagram. I'm going to be using it and seems as most guys have good luck with it.

http://westcoastmustangs.com/articles/tech/dual_fpdm/dual_fpdm.html#modifiedFPDM

That's the exact same diagram I used. I'm thinking that maybe I got sold some bad pumps...I bought them from a member here... the next thing im going to do is drop the tank take out the pumps and put my stock pumps in see what happens...THANKS FOR YOUR HELP! anyone else have any ideas....?....?....

 

[Torrance]

Did you upgrade the wire to your BAP?

 

[Sl0w7pt3]

Did you upgrade the wire to your BAP?

Yes i did