I have searched and did not find the answers. I have a dry zex kit. Please dont answer with "dry is your problem...go with a wet one". I also read the instructions and they just say run it here.
1) Which wire on the TPS does the white wire of the zex box run to? When I looked, there were 3 wires on the TPS clip.
2) Where do the hoses run that go from the box to the regulator and the intake? Where do they hook up in the car to up the fuel pressure?
I think I have everything else figured out. I also plan to buy an SCT xcalibrator 2 to get a custom tune done locally with and without the nitrous to make sure I am not running lean,etc.
TIA. :thumbsup:
1) Which wire on the TPS does the white wire of the zex box run to? When I looked, there were 3 wires on the TPS clip.
2) Where do the hoses run that go from the box to the regulator and the intake? Where do they hook up in the car to up the fuel pressure?
I think I have everything else figured out. I also plan to buy an SCT xcalibrator 2 to get a custom tune done locally with and without the nitrous to make sure I am not running lean,etc.
TIA. :thumbsup: