Drivers seat wiring .

[toolow91]

I did a search and still not finding any clear directions or answer - I am looking for the wiring schematics as to which wires need to be tied together for power and ground to power the lumbar and power seat to install in my foxbody . Thanks Jeff

 

[hotcobra03]

DG 12v
black ground
2pin connector

 

[toolow91]

DG 12v
black ground
2pin connector

Thank you - is this gonna power the bolster as well or just the seat movement ?

 

[hotcobra03]

Thank you - is this gonna power the bolster as well or just the seat movement ?

Lumbar only

 

[hotcobra03]

Im not home now..seat is a large connector 8 pins maybe

 

[toolow91]

Im not home now..seat is a large connector 8 pins maybe

If you can and get a chance when you are home let me no thanks again so much

 

[hotcobra03]

I looked..what of cobra seat harness do you have hanging?

I assume from diagram a 12 pin connector with 9 wires should be at end. .rest runs thru seat from power switches

 

[hotcobra03]

http://www.bbbind.com/tech_database.html

Try this for diagram..look for c360.c316 .c361 between the 2 diagrams. 1 is power seat..2 is lumbar with power seat

 

[hotcobra03]

U will see DG has 2 wires in 12 pin connector pin 1 and 4 but they are different Guage wire..1 is lumbar 4 is seat both feed from different size fuse..

 

[toolow91]

Thanks for the info I appreciate it .

 

[hotcobra03]

Hope it helps...there is a 1989 wiring diagram also floating around..its the full layout type diagram of complete car..

If you need more info on wires just post

 

[toolow91]

This was very easy . Took the 2 green wires from the cobra plug turned them into 1 wire and then used the ground with 2 spades on each I checked the continuity of the foxbody plug and my spades went right in . All controls work including the side bolster adjustment