Driver side clunk

slow06

Well-Known Member
Established Member
Joined
Nov 14, 2010
Messages
397
Location
charlotte, NC
I recently lowered the car, I used Koni.str.t struts along with Gt500 strut mounts. Everything was smooth until someone cut me off and had to come to a quick stop. After that the car has developed a small clunk, I can feel it through the floor boards going over small bumps at slower speeds and feels like something is loose.

With the tires straight I can push down on the fender area and I can get it to clunk, with the tires turned to either side it wont do it. I lifted the car today and the bushings look good, ball joints seem fine and tie rod ends have no play. I'm just wondering if I should order new strut mounts or a new strut. I really don't know what the mileage is on the struts, I got them off the forum. No blame on anyone, everything was fine until I got cut off.

Thanks in advance.
 

Riddick

MERICA
Established Member
Joined
Oct 25, 2012
Messages
2,640
Location
Dayton, OH
I would start by taking the wheel off and making sure everything is torqued to spec and installed correctly.

Sent from my XT1097 using Tapatalk
 

Users who are viewing this thread



Top