Drag pack that doesn't require modifications?

5.0 Hatch

Well-Known Member
Established Member
Joined
Dec 21, 2005
Messages
1,182
Location
Gulf coast
All the drag packs I see now are for s197/s550 fitment. Are there any drag pack setups available for irs cobras that do not require grinding?
 

BlckBox04

I am the liquor
Established Member
Premium Member
Joined
Dec 24, 2007
Messages
8,548
Location
NJ
You won’t get a 15” on without grinding, but it can be done. 16 and up no modifications as long as you know your correct backspacing.
 

NotoriousGT350

Lubbock Terminator
Established Member
Joined
May 10, 2005
Messages
1,420
Location
Lubbock,TX
I have Bogart D-10s which were the "Terminator Special" when you ordered them way back in the day. 15x3.5" w/ 1" welded spacer for fronts and 16x10 w/ 6.5" BS for the rears to clear brakes/suspension for IRS cobras. Remember talking to Rick or Rich Bogart over the phone when I put in an order for the "Terminator Special"
 
Last edited:

Rambro

Well-Known Member
Established Member
Joined
Oct 25, 2006
Messages
1,599
Location
Illinois
I have diamond 16x10 rears and jegs 17x4.5 fronts. These bolt up without any modifications.
 

03terminatorcobra

Active Member
Established Member
Joined
Jan 26, 2018
Messages
143
Location
CA
I have Bogart D-10s which were the "Terminator Special" when you ordered them way back in the day. 15x3.5" w/ 1" welded spacer for fronts and 16x10 w/ 6.5" BS for the rears to clear brakes/suspension for IRS cobras. Remember talking to Rick or Rich Bogart over the phone when I put in an order for the "Terminator Special"

I also ran this setup before I switched to 9". Hoosier c07's were my tire of choice and I would cut consistent low 1.4 60fts launching at 4k rpm on the IRS.
If you call Bogart, they will take care of you and they already have the correct backspacing needed for an IRS setup.
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,932
Location
El Paso, TX
I have Bogart D-10s which were the "Terminator Special" when you ordered them way back in the day. 15x3.5" w/ 1" welded spacer for fronts and 16x10 w/ 6.5" BS for the rears to clear brakes/suspension for IRS cobras. Remember talking to Rick or Rich Bogart over the phone when I put in an order for the "Terminator Special"

Post pics!

I have 18” classics but I love how the D10s look.


Sent from my iPhone using the svtperformance.com mobile app
 

NotoriousGT350

Lubbock Terminator
Established Member
Joined
May 10, 2005
Messages
1,420
Location
Lubbock,TX
IMG_4987.JPG
IMG_4993.JPG
IMG_5017.JPG
IMG_4974.JPG
IMG_5034.JPG
 

Users who are viewing this thread



Top