Drag at 115mph to 126mph

mtl-biker

New Member
Established Member
Joined
Jan 25, 2005
Messages
327
Location
quebec canada
Hi

My friend install a zex wet kit with a shot of 125NOS Ported blower at 17psi.All the fuel system are upgrated.
The car with no NOS he ran at 115mph in a 1/4 miles
After we add the 125 shot of NOS with backing the timming of 4 deg the car go now at 126mph in a 1/4 miles.

Did you think thats 125NOS give more than 11 miles on 1/4 miles or its ok like that

Were just curious

Thanks
Mario
 

vr4

Active Member
Established Member
Joined
Aug 2, 2006
Messages
506
Location
somewhere
as an improvement thats about right. a little on the low side but at those speeds i would think its around where it should be.
 

redsvtcobra

Member
Established Member
Joined
Aug 17, 2004
Messages
669
Location
Cali
I think the mph for those mods without the juice is on the very low side. What's the elevation there?
 

redsvtcobra

Member
Established Member
Joined
Aug 17, 2004
Messages
669
Location
Cali
mtl-biker said:
Here we are at 100ft from the s/level

Mario

I would say there is something wrong to only trap 115mph on those mods. That's only about 3mph higher than a completely stock terminator.
 

mtl-biker

New Member
Established Member
Joined
Jan 25, 2005
Messages
327
Location
quebec canada
redsvtcobra said:
I would say there is something wrong to only trap 115mph on those mods. That's only about 3mph higher than a completely stock terminator.


Ok thanks

My friend go on the dyno tuesday i let you know the result of that and what happens later on the track

Always good to have some helps its appreciate

Mario
 

Users who are viewing this thread



Top