Do you think I can fit 315/30/18 Hoosier drag Radials??

[badaz5.0]

Alright guys Im looking into some 315/30/18 Hoosier drag radials for my cobra. My concern is will they rub since I have the H&R race springs. I am running 295/35/18 BFG KDW's right now! Please let me know what you think or even post a pic of your ride if you are running the same setup! thanks

 

[shftn6]

Should fit no problem with low pro IRS bolts and fenders rolled.

 

[badaz5.0]

You think I will have to roll the fenders to fit them? I was hoping I wouldn't have too! Damn

 

[04RiceEater]

I used to have 335s on 17" rims on my old cobra and had the low profile IRS bolt and 3/8 spacer and they fit fine. Not sure about the 18' though.

 

[HouseOfPower]

Fenders will need rolled with h&r's. No question. Even if it was close why chance cutting an expensive tire or worse yet wrecking

 

[badaz5.0]

That's true! How hard is it to roll the fenders?

 

[HouseOfPower]

That's true! How hard is it to roll the fenders?

not hard with the proper tool

 

[95YellowGTBeast]

I put 315/30/18s on my car with stock irs bolts on a 18x10 wheel, it was really close like 1-3/16ths of an inch from the irs bolt

 

[Wicked46]

Your gonna kill yourself when they wear out in 6 months and you've spent all that money on such a big tire. Hoosier drag radials are by FAR the best drag radial i've used, but they wear out WAY to fast. If you must stuff a wide tire on your car, i'd go with another brand that will last longer (Nitto, M&H, M/T etc).... just my opinion.

 

[LGHTEMUP]

ok you guys are all killing me THEY ARE CALLED 1/4 PANELS NOT FENDERS....

 

[ret_junior]

They will fit with just a fender roll. i have them on my cobra right now! here are the pictures of them.

LS7HNTR DRAG RADIALS 315/30R18 | Facebook

 

[badaz5.0]

Thanks for the input guys!