Do my 1/4 mile times seem a little off to yall?

93cobracoupe

Member
Established Member
Joined
Jan 23, 2009
Messages
140
Location
San Antonio Tx
Just wondering if my setup is a little low on power. Its a stock 93 cobra motor with stock heads with a car tech single 61mm turbo kit. It put down 380 whp and 440 wtrq on 6 lbs. The car is a full weight 93 Cobra and has run 11.8@117 with a 1.8 60ft. That is the fastest of 3 passes it has been down the track. It obviously got faster every run and probably could get it down to a 11.6 with more track time but the mph seems alittle slow to me. Wondering what you guys thought. Thanks
 

buddha93

Well-Known Member
Established Member
Joined
Oct 31, 2002
Messages
2,636
Location
St. Louis
Nope, sounds dead on to me. Looking at your 60' and ET, and considering your in a full weight car, it's doing extremely well at only 6psi.
 

93cobracoupe

Member
Established Member
Joined
Jan 23, 2009
Messages
140
Location
San Antonio Tx
I just got done doing the Digital 6 with 2 step (should be worth some good ET), put a trex on for more fuel and a boost controller so I can pump up the boost a little. Really wanting to get a 10.9999. We will see. Only thing I need is the moser axles.
 

93Cobra#2771

SVT God
Established Member
Joined
Aug 20, 2002
Messages
4,882
Location
Driving the Cobra
My advice - if you are running slicks, better get the axles NOW before you pop one. Friend of mine broke one a stock headed full weight car with 5200 rpm launches...
 

93cobracoupe

Member
Established Member
Joined
Jan 23, 2009
Messages
140
Location
San Antonio Tx
Yeah Im gonn get the axles at least before I launch on the 2step. I am running ET Streets. Not really a big fan of slicks especially on a street car.
 

Big Ben

stangsofsouthflorida.com
Established Member
Joined
Feb 26, 2006
Messages
1,007
Location
Aventura, Florida
I put down 380rwhp / 501 tq on spray and run almost the EXACT same times on slicks, so I would say you are all good!
 

Mr.Venom

Quick with Boltons
Established Member
Joined
Mar 13, 2009
Messages
808
Location
Dover, DE
Stupid question, are you talkin about dumping clutch at 5200? Like no rolling out at all?
 

93Cobra#2771

SVT God
Established Member
Joined
Aug 20, 2002
Messages
4,882
Location
Driving the Cobra
:lol:

I hear you on that. The car was basically dead hooking right off the line. It was something to see. I believe the car had a 4.10 gear under it and a cam change, but other than that bone stock.
 

Users who are viewing this thread



Top