**UPDATE**
All head set sold PM me I get these all of the time
Thanks Woody
Hello to ya all out there.
I go through and check these heads out and you are getting the best used DB/DC heads you can get. They are all excellent used condition. I clean/ degrease them, remove all studs broken or not. Chase threads with a tap, check cam bearing journal non of these have any gouges. Then spin test the cams for ease of operation. Nobody check these out as well as I and please PM me for any questions and additional pix because I am limited to the pix amount.
These heads are all excellent for you HP projects.
The DB/DC heads have the cooling mod and 9 thread sparkplug holes. I have sold hundreds of these heads for the last 11 years and they are getting harder to fine. There were only 8k of the DC that were available. One set out of every 3 I get are no good. There are few available as the time goes by so get a set now.
I can ship these heads to you complete, or if you don't need the metal parts since you are going to build them with HP parts I will remove parts you don't need and this will substantially reduce the shipping cost. It goes from complete set to stripped. Your choice just let me know what you want/don't want and I will strip them for you. Insurance is a must on these babies.
I put the most important pix in the cam journals and caps which have no gouges, lash adjuster bore and the crossover port which shows no corrosion.
Set 1 is a DB-9 thread.
$700 plus shipping and insurance
Set 2 $700 plus shipping and insurance
Thats all of the pix I can get on this, I am limited to 10 pix so PM me for more
If you have any questions, PM message me
Thanks Woody
Mesteno Modular Parts
407-697-1115
Any questions PM me please
Thanks again
Woody
All head set sold PM me I get these all of the time
Thanks Woody
Hello to ya all out there.
I go through and check these heads out and you are getting the best used DB/DC heads you can get. They are all excellent used condition. I clean/ degrease them, remove all studs broken or not. Chase threads with a tap, check cam bearing journal non of these have any gouges. Then spin test the cams for ease of operation. Nobody check these out as well as I and please PM me for any questions and additional pix because I am limited to the pix amount.
These heads are all excellent for you HP projects.
The DB/DC heads have the cooling mod and 9 thread sparkplug holes. I have sold hundreds of these heads for the last 11 years and they are getting harder to fine. There were only 8k of the DC that were available. One set out of every 3 I get are no good. There are few available as the time goes by so get a set now.
I can ship these heads to you complete, or if you don't need the metal parts since you are going to build them with HP parts I will remove parts you don't need and this will substantially reduce the shipping cost. It goes from complete set to stripped. Your choice just let me know what you want/don't want and I will strip them for you. Insurance is a must on these babies.
I put the most important pix in the cam journals and caps which have no gouges, lash adjuster bore and the crossover port which shows no corrosion.
Set 1 is a DB-9 thread.
$700 plus shipping and insurance
Set 2 $700 plus shipping and insurance
Thats all of the pix I can get on this, I am limited to 10 pix so PM me for more
If you have any questions, PM message me
Thanks Woody
Mesteno Modular Parts
407-697-1115
Any questions PM me please
Thanks again
Woody
Last edited:
