Went to the track yesterday with a couple of our maca track guys - most notably Mr. 10.012 Hissssnsvt, and data logged one run to get some IAT2 temps with the new blower. The temperature was in the mid 60's at the time of this run. Don't know the DA or Rel Humidity.
I was seeing 19lbs of boost with the 3.5/4lb combo & running 22 degrees timing with the race gas. I was able to break into the 10's with a [email protected] 1.57 60ft. That was my goal to get a 10 first time out with the 2.6. New goal - keep improving, lower ET's & raise MPH.
Here's the data:
Inlet ---- IAT2 ---- Coolant
88 - - - - 92 - - - - 164 - - start_launch rpms_4987
82 - - - - 96 - - - - 166 - - end of 1st gear_rpms_ 6087
72 - - - - 104 - - - - 168 - - end of 2nd gear_rpms_ 6480
68 - - - - 112 - - - - 172 - - end of 3rd gear_rpms_ 6222
66 - - - - 116 - - - - 182 - - through the traps_rpms 5748
I was seeing 19lbs of boost with the 3.5/4lb combo & running 22 degrees timing with the race gas. I was able to break into the 10's with a [email protected] 1.57 60ft. That was my goal to get a 10 first time out with the 2.6. New goal - keep improving, lower ET's & raise MPH.
Here's the data:
Inlet ---- IAT2 ---- Coolant
88 - - - - 92 - - - - 164 - - start_launch rpms_4987
82 - - - - 96 - - - - 166 - - end of 1st gear_rpms_ 6087
72 - - - - 104 - - - - 168 - - end of 2nd gear_rpms_ 6480
68 - - - - 112 - - - - 172 - - end of 3rd gear_rpms_ 6222
66 - - - - 116 - - - - 182 - - through the traps_rpms 5748
Last edited:
