Cutting springs ?

[JoshHooten]

ok I have ford c springs and I want a small drop .5 to .75 inch not looking for a 1.5 or 2.0 inch drop and they are not progressive springs so my question is , do I cut from the top or the bottom of the front and back ?
I know its not the best way to do it but im not looking ro gain much just a little

 

[spike_africa]

Cut the bottom and only do half a coil. Should give you around 1/2" drop. Did it with my bullitt springs on the front to level it out.

 

[Slow Five-O]

Cut the bottom and only do half a coil. Should give you around 1/2" drop. Did it with my bullitt springs on the front to level it out.

X2. Half coil should've enough.

 

[40thStang22]

Start at a half coil and if you want more Take away a little more at a time. Don't wanna cut off too much from the get go!

 

[havok209]

ok I have ford c springs and I want a small drop .5 to .75 inch not looking for a 1.5 or 2.0 inch drop and they are not progressive springs so my question is , do I cut from the top or the bottom of the front and back ?
I know its not the best way to do it but im not looking ro gain much just a little

Have you done this yet? If so, how did it go? I have C Springs as well and i'm looking for just a taaaad less height.