I have for sale a custom paxton 2200 setup that I have modified to meet the needs for big power.
All the intercooler piping is 3 inch hand made piping that connect to a 4inch core intercooler that keeps iat's right where they need to be, also on the cold side of the piping the 3 inch piping turns into 4 inch which is where the maf slot is lcoated and this is in the straightest and largest pipe to give your maf a very easy yet strong signal to read. "the setup is a blow through design so the excess air is vented to the atmosphere"
the Kit includes:
Paxton 2200 head unit that is oil fed. (3.15 pulley on blower)
All neccessary brackets for install
8 rib drive to keep the belt in check
10% inovaters west overdrive crank pulley
Brand new 2.85 8 rib supercharger pulley
custom air to air intercooler setup
tial blow off valve
custom 4 inch fenderwell intake that draws air from behind the front bumper
Ill also include a 4 inch intake that draws air from the engine bay upon request
New in box K&N air filter
*you will need to provide your own fuel setup, belt, tuning, and maf
*this kit is used and may or may not require you to relocate the coolant resevoir. since it is used you may need to proive a random bolt or too but im pretty sure that I have everything you need.
*this kit is desighned to fit any 05-10 mustang GT
*the buyer is responsible for the shipping and paypal fees.
Im asking 4200 OBO
:hi:
All the intercooler piping is 3 inch hand made piping that connect to a 4inch core intercooler that keeps iat's right where they need to be, also on the cold side of the piping the 3 inch piping turns into 4 inch which is where the maf slot is lcoated and this is in the straightest and largest pipe to give your maf a very easy yet strong signal to read. "the setup is a blow through design so the excess air is vented to the atmosphere"
the Kit includes:
Paxton 2200 head unit that is oil fed. (3.15 pulley on blower)
All neccessary brackets for install
8 rib drive to keep the belt in check
10% inovaters west overdrive crank pulley
Brand new 2.85 8 rib supercharger pulley
custom air to air intercooler setup
tial blow off valve
custom 4 inch fenderwell intake that draws air from behind the front bumper
Ill also include a 4 inch intake that draws air from the engine bay upon request
New in box K&N air filter
*you will need to provide your own fuel setup, belt, tuning, and maf
*this kit is used and may or may not require you to relocate the coolant resevoir. since it is used you may need to proive a random bolt or too but im pretty sure that I have everything you need.
*this kit is desighned to fit any 05-10 mustang GT
*the buyer is responsible for the shipping and paypal fees.
Im asking 4200 OBO
:hi: