Custom Manley 300M stroker rods

[bgfrulla1]

I contacted Manley Friday asked about getting rods made from 300M versus 4340 but made to the stroker I-beam specs. They said it is custom and would require 40 rods to make at $2050 per set. Any takers? 500 more than pro I beams. STEEP

 

[bgfrulla1]

I did find some rods that are the same stroke, big end bore, big end width but the pin end is .950 wide and pin is .912 which would require custom pistons also 7/16 rod bolts. All the different specs make for a much stronger rod. Rod should hold 1500-1700hp
Stoker specs: 5.850" long
Big end bore 2.125
Big end width .940
Pin End width .940
Pin Bore .871