02yellowgt
New Member
I know I've seen talk about welding in bungs to add gauges to 03 cobra crossover tubes. are you able to remove the crossover tube without unbolting the supercharger?
coolant temp location in crossover tube
- Thread starter 02yellowgt
- Start date
Here is a link to the adapters. Just remove the factory thread in plug from the crossover tube.
http://www.svtoa.org/landm_temp_adapter.htm
Paul.
http://www.svtoa.org/landm_temp_adapter.htm
Paul.
02yellowgt
New Member
Paul, thanks for that link but I'm trying to install 2 gauges.
1 electrical temp gauge with either 1/8 or 1/8 3/8 adapter or 1/8 to 1/2 inch
2 high temperature warning light indicator. only available in 1/2
My problem is the 1/2 temp sending unit light won't work with those adapters on that website.
I'm thinking about putting a tee into the factory coolant temperature location that's is 3/8. this would allow me to reinstall the factory sending unit and would give me a extra 3/8 location or run a 3/8 or 3/8 back to 1/8 adapter and use my temp gauge in that location. The welding a 1/2 bung to the crossover tube and installing the coolant indidcator light in that location
1 electrical temp gauge with either 1/8 or 1/8 3/8 adapter or 1/8 to 1/2 inch
2 high temperature warning light indicator. only available in 1/2
My problem is the 1/2 temp sending unit light won't work with those adapters on that website.
I'm thinking about putting a tee into the factory coolant temperature location that's is 3/8. this would allow me to reinstall the factory sending unit and would give me a extra 3/8 location or run a 3/8 or 3/8 back to 1/8 adapter and use my temp gauge in that location. The welding a 1/2 bung to the crossover tube and installing the coolant indidcator light in that location
Users who are viewing this thread
