For sale to change set-up.
Mexico block- o-ringed Felpro head gaskets
347ci balanced 10 to 1 compression ratio
Coast High Performance Main Girdle
Probe pistons (skirts coated)
Childs & Alberts rings
Crower Blue Thunder rods
ARP bolts (head/rod/main)
Scat Crankshaft
Comp lifters & rockers 1.6 ratio
KAM motion solid lift camshaft (custom grind)
Intake duration 239.5 lift .603
Exhaust duration 248.2 lift .594
Lobe seperation 111.9
Victor Jr. heads Stage 3 ported intake 2.05 exh 1.60
Edelbrock water pump
Canton 7qt oil pan
Edlebrock Victor Jr intake adapted to fuel injection
30lb Motorsport injectors
1/2" fuel rails
75mm BBK throttle body
MSD Pro 5.0 distributor
Romac Steel Balancer
Melling oil pump
Nitrous System-
Cold fusion EFI direct port kit with custom built stainless steel lines
200 hp with 10lb bottle
Have Cam Spec sheet, build sheet from machine shop (Owens Racing Engines in Pearland Tx)
Dyno sheets- to the ground through Tremec
Motor only- 425.4hp 393.5 torque
Spray- 614.8hp 690.3 torque
Best E.T. 10.22@131 1/4mile 6.41@108 1/8mile
3200 lb on ET Streets.
$5000 for everything.
Engine is still in the car. It is located in College Station, Tx. Can be heard running or driven. Please contact me or e-mail [email protected]
Mexico block- o-ringed Felpro head gaskets
347ci balanced 10 to 1 compression ratio
Coast High Performance Main Girdle
Probe pistons (skirts coated)
Childs & Alberts rings
Crower Blue Thunder rods
ARP bolts (head/rod/main)
Scat Crankshaft
Comp lifters & rockers 1.6 ratio
KAM motion solid lift camshaft (custom grind)
Intake duration 239.5 lift .603
Exhaust duration 248.2 lift .594
Lobe seperation 111.9
Victor Jr. heads Stage 3 ported intake 2.05 exh 1.60
Edelbrock water pump
Canton 7qt oil pan
Edlebrock Victor Jr intake adapted to fuel injection
30lb Motorsport injectors
1/2" fuel rails
75mm BBK throttle body
MSD Pro 5.0 distributor
Romac Steel Balancer
Melling oil pump
Nitrous System-
Cold fusion EFI direct port kit with custom built stainless steel lines
200 hp with 10lb bottle
Have Cam Spec sheet, build sheet from machine shop (Owens Racing Engines in Pearland Tx)
Dyno sheets- to the ground through Tremec
Motor only- 425.4hp 393.5 torque
Spray- 614.8hp 690.3 torque
Best E.T. 10.22@131 1/4mile 6.41@108 1/8mile
3200 lb on ET Streets.
$5000 for everything.
Engine is still in the car. It is located in College Station, Tx. Can be heard running or driven. Please contact me or e-mail [email protected]
