Comp 106300s finally installed

[boost88]

Just hit my first start. Don't have a nice low idle yet I've got some stuff to clean up. Tomorrow I should be able to get a decent low idle clip of it.

Sent from my SM-G988U using the svtperformance.com mobile app

 

[Captain Fluffy Nuggies]

Sounds great!!! Looking forward to hearing it chop a little.

 

[DSG2003Mach1]

I think those are what was in Shake and Bake or similar, definitely a solid chop to them once you get the idle settled in.

 

[boost88]

Here's an 800 rpm idle shot

Sent from my SM-G988U using the svtperformance.com mobile app

 

[Captain Fluffy Nuggies]

Sounds very nice!

 

[LaserRed_Snake]

Did you degree the cams?


Sent from my iPhone using svtperformance.com

 

[boost88]

Yeah 110/115

Did you degree the cams?


Sent from my iPhone using svtperformance.com

Sent from my SM-G988U using the svtperformance.com mobile app

 

[LaserRed_Snake]

Sounds sweet!


Sent from my iPhone using svtperformance.com

 

[boost88]

Thanks I appreciate it

Sent from my SM-G988U using the svtperformance.com mobile app

 

[CourteousCain]

I'm going to be installing 106300's in my '97 Cobra as well. Did you measure your piston to valve clearance? Did you have to do any modifications to the cam girdles, or do they fit and rotate without hitting?

Thanks!

 

[boost88]

I didn't have any issues on a stock bottom end. I did have modular head shop degree them though and they do check ptv.

As far as the cam girdles I did clearance them. It wasn't too much a carbide Burr bit took care of it pretty quickly

Sent from my SM-G988U using the svtperformance.com mobile app

 

[CourteousCain]

I didn't have any issues on a stock bottom end. I did have modular head shop degree them though and they do check ptv.

As far as the cam girdles I did clearance them. It wasn't too much a carbide Burr bit took care of it pretty quickly

Sent from my SM-G988U using the svtperformance.com mobile app

Cool! Did you or they do any porting on the heads or intake?
Have you had a chance to take it out yet to see the difference?

 

[boost88]

It's just on a base map right now I haven't had the chance to drive it yet though.

Intake is a short runner not ported just shortened

Sent from my SM-G988U using the svtperformance.com mobile app