colorado cobra

ZOSO

colorados baddest eaton
Established Member
Joined
May 17, 2004
Messages
459
Location
Co
well Im on my way to be the only eaton only powered cobra in colorado to run 11's. Sambandit did it once. No one else has. My car has stage 2 port. 2.8 upper. 4lb lower. catback. jlt intake. milehi dyno tuned. Weighed 3680 with me in it. Stock IRS with brace. subframe connectors. big and little's. car makes about 410rwhp UNCORRECTED

r/t .123
60' 1.79
330' 5.100
1/8 7.851
mph 90.05
1000' 10.188
1/4 12.165
mph 114.72
 

LSWHAT??

New Member
Joined
Nov 19, 2004
Messages
599
Location
Colorado
Nice man! That is one hell of a time in CO. Is this Bandimere or PMI?

I didn't know this had only been done once before, seen lots of 03/04's in the 11's, didn't figure they all had upgraded blowers or spray.

My buddy Moses ran 12.8 at 111 at the last Coys, full weight 04 with exhaust and pulley on 19 inch rims, guess he has a long way to go to get that 11 second slip.

Good luck to ya :rockon:
 

ZOSO

colorados baddest eaton
Established Member
Joined
May 17, 2004
Messages
459
Location
Co
TheAntiRice96 said:
Nice man! That is one hell of a time in CO. Is this Bandimere or PMI?

I didn't know this had only been done once before, seen lots of 03/04's in the 11's, didn't figure they all had upgraded blowers or spray.

My buddy Moses ran 12.8 at 111 at the last Coys, full weight 04 with exhaust and pulley on 19 inch rims, guess he has a long way to go to get that 11 second slip.

Good luck to ya :rockon:



All the 11 second cobra's in colorado that i know of are all KB or eaton and spray. I plan to start with some suspension work. And maybe a little motor work. Still have the stock manifolds and h-pipe. All stock suspension. So i'll get it one way.



and yea it was at bandimere. If i go to pueblo on a cool day 11's for sure.
 

ZOSO

colorados baddest eaton
Established Member
Joined
May 17, 2004
Messages
459
Location
Co
thats a 4500rpm launch. The tires spin at that. Each time I run they get better. less than a dozen passes on slicks. It's a learning curve.
 

musclefan21

Well-Known Member
Established Member
Joined
Mar 21, 2007
Messages
10,880
Location
USA
You shouldn't spin on slicks unless the track is prepped bad. try revving up to 5k and slip the clutch instead of dumping. it should give you a good 60 without spinning the tires. thats how i launch.
 

19COBRA93

Tire shredder
Established Member
Joined
Jul 9, 2003
Messages
4,899
Location
Clinton, Utah
I'm knocking on the 10's door in Utah. That's with nitrous. Went 11.5 without. That's not really all that great for this board, but for the high altitude states, it's pretty good.

I've been wanting to run at Bandimere to see how it compares to RMR in Utah.
 

ZOSO

colorados baddest eaton
Established Member
Joined
May 17, 2004
Messages
459
Location
Co
the average DA at bandimere is 8000+'

I cant slip the clutch. It's a high milage DFX. If i slip it It dont shift. It's a all or nothing thing. it's a little worn out. just at 11k for the DFX which is really high milage.
 

Users who are viewing this thread



Top