Cold Air Intakes

Matt03

New Member
Established Member
Joined
Jun 4, 2002
Messages
221
Location
Mechanicsburg, Pa
I want to put on a cold air intake but i am a liitle confused. I was going to go with the densecharger but does that replace the whole intake or just from the filter to the mass air meter. I see that the upr replace only from the mass air down. Also does either the upr or the densecharger setup come with a better mass air meter to support the added boost of a 2.80 pulley? Any advice would be great! Thanks!

Densecharger
 

toofast4u

Versatilist
Established Member
Joined
Jun 22, 2002
Messages
4,650
Location
Atlanta, GA
Yes, the Densecharger and the UPR both only replace from the Mass-Air down.

Densecharger
kit09-CF03CMF.jpg


UPR
03_Intake_LRG.gif


I have not seen one with a larger mass air and if you did change to a larger mass air these CAI systems would have to be replaced because the tube diameter would be restrictive then.
 

Jim Vaccaro

New Member
Established Member
Joined
Jul 3, 2002
Messages
1,984
Location
Brooklyn,N.Y.
Your Mass air meter is a 90..C&L makes a 95MM mass air meter..On my car the Stock meter worked fine.
I don't think you can use the C&L with the UPR or Denscharger.

Jim V.
 

Users who are viewing this thread



Top