cobra jet intake throttlebody question

[Foxkid87]

Was woundering if this tb will work on the cobrajet intake. Im looking to get the most out of my set up. 93 coyote swap coupe. Will be running megasquirt 3-pro stand alone and will be single turbo..
https://whipplesuperchargers.com/index.php?dispatch=products.view&product_id=159

 

[KushBandit]

Yes, a Whipple throttle body will bolt right up. They flow a tiny bit more CFM over the Super Cobra Jet throttle body as well.

Edit: SCJ is 1797cfm, while the Whipple is 2175cfm. Quite a difference now that I looked it up.

 

[Foxkid87]

Yes, a Whipple throttle body will bolt right up. They flow a tiny bit more CFM over the Super Cobra Jet throttle body as well.

Edit: SCJ is 1797cfm, while the Whipple is 2175cfm. Quite a difference now that I looked it up.

Thanks, i may go this route then.

 

[ryno529]

I have a cj mani and was warned its a pain to keep the coupler from leaking or blowing off on the large oval t bodies past 15psi. I'm sure you could put a bead around it or maybe a turn buckle just a heads up.

 

[Foxkid87]

I have a cj mani and was warned its a pain to keep the coupler from leaking or blowing off on the large oval t bodies past 15psi. I'm sure you could put a bead around it or maybe a turn buckle just a heads up.

Thanks for the heads up.. Ill figure something out if i run into problems