02yellowgt
New Member
needing the driveshaft lengths for a 03 cobra and a late model gt. I tried to switch my drivshaft yoke from my 03 cobra over to a older drivshaft but the 03 universal joint wouldn't switch because it's diamater was larger then the driveshaft. what driveshaft do you get to switch the driveshaft yoke over?
distance needed is 43 1/2 that is with the 03 yoke 1" away from bottomming out at the transmission and the tailshaft flange mounted. measurement taken from center of universal joint front and center of rear flange
Note: I do not have a 99/03 drivshaft at all . All I have is the 03 cobra yoke and tailshaft flange and what I think to be is a older 94/95 drivshaft.
application: 03 cobra drivetrain.. moved 1" back and a live axle swap.
distance needed is 43 1/2 that is with the 03 yoke 1" away from bottomming out at the transmission and the tailshaft flange mounted. measurement taken from center of universal joint front and center of rear flange
Note: I do not have a 99/03 drivshaft at all . All I have is the 03 cobra yoke and tailshaft flange and what I think to be is a older 94/95 drivshaft.
application: 03 cobra drivetrain.. moved 1" back and a live axle swap.
