The best friend for your clutch is to replace the anemic 3.31 gears.
Stock clutch and 4.10s, probably same price installed.
-J
Stock clutch and 4.10s, probably same price installed.
-J
...Or maybe not having the flywheel resurfaced?As far as manners go, I get a tiny bit of chatter when taking off, but that's my fault for not giving it a lil more gas.
The rxt bolts onto your flywheel. So no need to resurface or replace your flywheel too.
What's the reason for resurfacing or replacing the flywheel if op buys the mcleod rxt? The car has 22k miles on it and the rxt discs don't come into contact with flywheel. The rxt is pre-assembled.
Perhaps this is the case with the RST clutch assembly but unless mistaken it is not the case with the RXT assembly. When I had my RXT (model #697507M) installed it didn't require any flywheel resurfacing. The clutch assembly just bolted to the stock flywheel and has its own back plate built into the assembly.
Perhaps this is the case with the RST clutch assembly but unless mistaken it is not the case with the RXT assembly. When I had my RXT (model #697507M) installed it didn't require any flywheel resurfacing. The clutch assembly just bolted to the stock flywheel and has its own back plate built into the assembly.
Perhaps you're not familiar with the rxt. It's not necessary to mess with flywheel considering op got 22k miles on car. And how about actually looking at the clutch assembly, before assuming I'm incorrect. The "bottom* clutch pad doesn't do as you describe. But since you linked whatever it was you linked, you must be correct. The rxt is an assembled clutch out of the box and the flywheel touches nothing except the thick metal mounting ring on" bottom" of the rxt.
R15393 is correct. Flywheel is only used to start the car and mount the clutch to with an rxt.
Well, had the clutch installed.
...
2. Although new, the engagement point of the clutch is much closer to the bottom of pedal travel and the pedal feels much more linear (assist spring still in).
3. Higher revs are needed for take off to avoid chatter......