I installed a firoe clutch quardrent along with a m&m firewall adjuster. The kit came without instructions so I used the ones on there web site. When I finished with the install the cable is about 1 inch to long even with the adjuster all the way out. But the promblem im having is even when i do make contact with the clutch fork(about one inch of travel on the pedal) the pedal pressue is very very stiff. Any ideas on were i went wrong? Anyone ever have this problem? thanks
clutch firewall adjuster to loose
- Thread starter slowsi
- Start date
Stock cable, Fiore adjuster will give you maximum adjustability but CALL the manufacturer of the clutch, get the install instructions. You need to double check your install.
Last edited:
Yes stock cable, spec 3+ clutch (installed for over a year). I will call tomorro and see what they say, i just didnt no if there was something easy that im missing that would cause to much slack in the cable along with a very stiff pedal when it finally does contact the fork.
U might need a quadrant with multiple hooks on it.I've had that happen and I have a spec 3+.
Users who are viewing this thread
