clear corner install?

[Brad Azz]

I got the plastic cover up and the bolts on the back of the light off...

What do you do from here?

 

[ju015dd]

dude, there is like two nuts to take off on each light. then the corner light comes out and you have to take the bulb out. that is really it.

 

[Tabres]

ummm... disconnect the bulb, pull it out?

It's really straightforward :dw:

 

[raven69david]

Come on guys give him a break. I hate working on my car too in fear that i will foul something up. If you've never done and don't have a manual, ask...and that's exactly what he's doing. Let us know how it turns out man; we're just funnin' with you. :beer:

 

[CY98Cobra]

No question is a dumb question.

-Take the 7/16" nut off each side.
-Take a screwdriver and pry the light assembly away from the headlight (may not have the do that, I did)
-Take bulb out by turning the socket and pulling out.
-Put the bulb in by turning the socket in the light assembly (usually 1/4 turn)
-Align the poles that stick off the back of the assembly with the holes in the housing.
-Push the assembly in until it is flush with the headlight.
-Put the nut on the stud and tighten until snug.
That should be it. Very easy and won't take more than 15 mins.

 

[duane v]

YuKKK...clear corners are for honda's...DA snake boy!!!

 

[CY98Cobra]

Clear corners are for clean looking mustangs

 

[Brad Azz]

Thanks guys...

I already had the bolts off before I asked this question... I didn't want to pry on the light since I didn't want to break it, but it actually came off easier than I thought...