It looks easy enough. I see the 8 bolts but there is one bolt behind the intercooler manifold that looks like it'll be blocked by the manifold.
Is it possible to remove?
Is it possible to remove?
Can the supercharger snout be removed without removing the blower?
- Thread starter HPLouis
- Start date
This is what I’m talking about. The nipple with the red arrow.
Sent from my iPhone using the svtperformance.com mobile app
Sent from my iPhone using the svtperformance.com mobile app
Yah, I've been wondering about this too. Had some oil leaking from my snout, assuming the seal is bad. Sounds like from what i've seen you can cut that bottom bolt with a dremel (or something else) and then replace it with an m8 x 50mm, 1.25 pitch stud and then just use a nut over the top of that. I've also seen people mention hitting that tube/ nipple with a mallet until it is pushed down far enough for the bolt to clear. But honestly I'd like to hear input form others who have experience with this.
Users who are viewing this thread
