Can 60lb injectors support my mods?

[fallingup693]

I was running 476rwhp on the same combo but without the ported heads and with the stock blower @14psi but with boost drop-off to 10psi. I'm really concerned about running out of fuel but I don't think the wife will be very happy if I come up with another $400 item to spend money on....lol

Here are my mods. I'm sure there are plenty of people running a similar combo.

MODS:
04 Cobra heads MMR stage 3 port/polish
Posi Race ported Eaton @ 14psi
AFCO H/E
Full exhaust with longtubes
JLT ram intake/Accufab single blade
SCT 2600 MAF
2 Ford GT fuel pumps @40psi
KB BAP
Stock compression

 

[evolve]

Should be good.

 

[cobracide]

You could go BA2400 and no BAP with an Eaton.

 

[Silverboost]

that's interesting you are getting that much boost drop off with the posi ported eaton...

 

[fallingup693]

that's interesting you are getting that much boost drop off with the posi ported eaton...

When I made 476rwhp it was with stock eaton and no port job on the heads.
I haven't installed the posi eaton yet.

 

[fallingup693]

What kind of rwhp can i expect from A) The 60lb injectors B) My setup?

 

[rudycobra]

I made 694 with 60's , plan on sticking with them and hopefully still get Lil more hp

 

[Carbd86GT]

You're good OP, 60's are ok to about 700rwhp. After that, I'd recommend looking at going a bit bigger.

 

[fallingup693]

Alright, thanks for your input guys. I feel a bit better about it.