cam swap tools????

[svtcobra101]

i dont kno about soon,but maybe after some research,id like to go with a set of cams..id like to do a twin screw(KB) beef up the trans,then maybe look into a cam swap....ive read here and there and noted only needing camshaft positioning and camshaft retaining tools(other than basic air tools and a good torque wrench) do u guys know where i can buy these tools at online? thxs

 

[blackvenom77]

I'd check with Tosley Ford they are a great vendor on here.

You will need more like a Timing Wheel, Pointer, Positive Stop Tool, etc...
Have you checked this out yet?


http://www.seanhylandmotorsport.com/Instructions/caminstall4v02.pdf

 

[About2bite]

I'd check with Tosley Ford they are a great vendor on here.

You will need more like a Timing Wheel, Pointer, Positive Stop Tool, etc...
Have you checked this out yet?


http://www.seanhylandmotorsport.com/Instructions/caminstall4v02.pdf

Nice link :beer:

 

[GodStang]

You also need an Engine Hoist and Engine stand to make life easier when doing cams.

 

[ShelbyGuy]

aw, let him try and do them with the engine in the car. half the fun is reading the 'help - what do i do??' threads.

Here's a link that might prove useful:
http://www.toolsource.com/ford-4valve-timing-p-95981.html

 

[svtcobra101]

I'd check with Tosley Ford they are a great vendor on here.

You will need more like a Timing Wheel, Pointer, Positive Stop Tool, etc...
Have you checked this out yet?


http://www.seanhylandmotorsport.com/Instructions/caminstall4v02.pdf

nice link..thank you..this helped out alot..so pullin out the motor might be a good option?

 

[svtcobra101]

do u guys know of anyone in the Tucson/Phoenix area that can do this swap?

 

[blackvenom77]

nice link..thank you..this helped out alot..so pullin out the motor might be a good option?

No problem. :thumbsup:

Only know of one person on here who did it with the motor inside the car. Must of been a major headache.

I'd give these guys a call:

AMP Performance
4346 E. University Drive
Phoenix, AZ 85034-7318
(800) 454-8387
(602) 437-2727