c/c platehelp quick

[SVTcobra2]

in the middle of race spring / cc plate install and got the plates in and am ready to deal with the 4 spacers (2 big 2 small), that are on the top of the shock. The instructions sayfor a lowered car 1 smallone under the c/c plates and 2 big 1 small above, the top of the strut is about 3 inches high in the engine bay, what the proper spacing?
this is on an 03 cobra

 

[antiv6]

i think we figured it out it looks strange though

 

[Knoxville COBRA]

Sounds right,They do stick up pretty high.Post some pics of your drop when you can.

 

[antiv6]

will do

 

[dezracer]

MM race springs dont drop the car much though. Mine were getting into the hood blanket with 3 on top , so I split the diffrence. 1 large and one small on top, same on the bottom.

 

[antiv6]

some cell pics but you can see the drop
in the front it sits 26.5 to the fender and in the back its 26.75 with all stock iso's

 

[FlaSeaDude]

I'm running the Griggs Racing Caster / Camber plates and didn't end up with much of the strut protruding into the engine bay: