bypass clutch switch

Kenneth

Active Member
Established Member
Joined
May 21, 2011
Messages
1,376
Location
Louisiana
I thought I saw on here before but can't seem to find it now.

This evening I tried to start the car, I can hear fuel pumps kicking on, but when I turn the key to the start position NOTHING.
I'm just trying to rule out the simple things.
Checked all fuses= all good.

Car is a 2011 Shelby

On another note, I looked for the fuel pump inertia switch next to the driver side kick panel, there is 2 plugs but no reset button, did they move it to another location?
 

Kenneth

Active Member
Established Member
Joined
May 21, 2011
Messages
1,376
Location
Louisiana
Tried jumping the switch using a fuse. still nothing.

When I turn the key nothing,

Any help?
 

Kenneth

Active Member
Established Member
Joined
May 21, 2011
Messages
1,376
Location
Louisiana
OK found the problem.

Blew out gray relay in fuse panel under hood.
I believe it was #53, swapped it out with one of the other relays to test, fired right up.
 

Users who are viewing this thread



Top