Built MT82,MGW,RXT/flywheel.

olaosunt

Member
Established Member
Joined
Jan 20, 2012
Messages
590
Location
Carmel,Indiana
Done chasing a 9 second slip rowing this thing.
Gone a best of 10.3@138 and might have gotten there with added boost but belt kept slipping and can't get 60 ft where it needs to be.
Had the trans pulled and replaced worn parts including 2nd and 3rd gear synchros last winter.
Bronze fork pad/shift stop and gears cryotreated by shop that does a lot of work for professional race teams here in Indy.Shifts like butter although I suspect I had one of the "good ones" to start.
Trans now now has 28k and work was all done at about 23k.Also has whteline mount
Ran Amsoil from 10k.Never power shifted cause I don't know how.:bash:

MGW just refreshed with new bushings a month ago.Race bushings available .

McLeod replaced discs for RXT last April under warranty.Flywheel is non lightened steel
Comes with JPC clutch line.I have a brand new slave cylinder if you want it.

Transmission harness and PCM may be for sale.

I have a built auto waiting but need to sell this first so will drive it till then-Not much and no more racing.

$1300 for transmission,$250 for MGW and $650 for clutch Flywheel.
$2100 for package .
Split shipping costs .
Open to reasonable offers.
Will need to sell at least the clutch/flywheel before I take it out(I case you want just the MGW)

Can text 317-717-2797 ,email [email protected] or PM.
 
Last edited:

belfordp

Member
Established Member
Joined
Feb 7, 2014
Messages
103
Location
TX
Oh ok. If you had the RST, I would of bought it. The RXT would be too much clutch for my setup.

Killer Deals though! GLWS
 

olaosunt

Member
Established Member
Joined
Jan 20, 2012
Messages
590
Location
Carmel,Indiana
No,
When the crank broke off my alluminator (April)we looked at the tranny again after the engine was out.
My installer noticed the discs were worn at the time so McLeod replaced them.
The initial install of the clutch and flywheel was in 2013 when I did my first engine swap.
 

olaosunt

Member
Established Member
Joined
Jan 20, 2012
Messages
590
Location
Carmel,Indiana
The clutch disks have as many miles as my new motor ----May be 4000 miles.
Flywheel and rest of clutch assembly was at 14k miles and I am now at 28 K.
Note I sent in entire clutch assembly to McLeod .It was rebuilt with the new disks.
 

Users who are viewing this thread



Top