Built and Blown 04 Mach with lots of nice parts

medrick

Member
Established Member
Joined
Jul 24, 2008
Messages
309
Location
Tulsa, Oklahoma
Looking into getting something else so I'm putting my Mach up for sale. If I don't get what I want for it I will probably part it out and put it back to stock. Car has 62,xxx miles a clean title (with a lien) and is located in the Tulsa area. These are just some random photos I have of some of the parts and the car. And with this much done to it I am probably forgetting some things. Car made 563/545 to the wheels at 5500 on 91 octane and 706/627 on E85. Car runs great and has never been wrecked. Has a few rock chips on the hood. Only about 2500 miles since the motor has been put together. Car is very nice and clean and is built to a very high standard. No corners cut.

Price is $24,000.

Mods:

Engine
3V WAP block .020 and all machine work done
Factory Forged Kellogg Crank
Stock Heads and Cams (valves lapped in before motor was put back together)
Oliver Billet Rods w/ ARP 2000 Rod Bolts
Diamond Pistons 5.2cc dish with valve notches (10.0:1)
Clevite Tri Metal Bearings
Total Seal Pro Select Steel Rings
ARP Mainstuds
ARP Sidebolts
ARP Headstuds
ARP Crankshaft Bolt
ARP Camshaft Bolts
Fel-Pro Headgaskets
Canton 7qt Oil Pan
Ford Hi Volume Oil Pump w/ billet gear
Innovators West 18% Overdrive Dampner
Thump Racing Tensioner
8 rib conversion w/ Ford Pullies
NGK BR7EF Plugs

Transmission
03-04 Cobra T-56 w/ 60k miles (less than 5k since opened up)
26 Spline Input Shaft
Viper 5th and 6th gear (.50 overdrive in 6th)
RAM HDX Clutch (rated at 650 rwtq)
Factory Flywheel (turned before put back in)
MGW Shifter w/ Silver Race Handle
Factory Cobra 6 Speed Shift Knob
UPR Firewall Adjuster and Clutch Quadrant (Factory Clutch Cable)

Rear End
03/04 Cobra IRS / 65k miles (fresh fluid)

Exhaust
Stainless Works Longtubes w/ 3in Collectors
Stainless Works 3" X-Pipe (Hollowed Cats)
Custom 3" Stainless Cat Back w/ Magnaflow Magnapacks & 4" Magnaflow Tips

Suspension
UPR Tubular K-Member & A-Arms
Maximum Motorsports Caster Camber Plates
Maximum Motorsports Front and Rear Coilovers
Maximum Motorsports Full Length Subframe Connectors
Bilstein Shocks & Struts
Low Pro IRS Bolts
Moroso 3" Wheel Studs
UPR Bumpsteer Kit (Not Installed)

Supercharger
Procharger D1SC Headunit and Piping
Treadstone 4.5" Core Intercooler
Black Boots
T-Bolt Clamps
3" Black Powdercoated Piping
Vortech Mini Race Bypass Valve

Intake
Factory Intake Manifold
3/8" Intake Spacer
SCT BA5000 Meter

Fuel System
Stock 04 Mach 1 Fuel Tank
2 Stryker 340 Fuel Pumps
-8 Pushloc Feed Line
-6 Pushloc Return Line
ID 1000's
Fore Innovations Dual Pump Hat (New Design)
Fore Innovations Fuel Rails (New Design)
Fore Innovations Regulator

Electronics
Autometer Boost Gauge
Autometer Fuel Pressure Gauge
Innovate Wideband A/F
SCT X3

Cooling System
Factory Radiator
180 Degree Tehrmostat
Head Cooling Mod
Custom Coolant Crossover & Thermostat Housing Setup (moves thermostat to better location for more effective and accurate engine cooling)

Brakes
EBC Rotors and Pads
Stifflers Stainless Braided Lines

Wheels/Tires
AFS 18X9 & 18X10.5 03-04 Replicas
265/35/18 Nexen N3000
335/30/18 Toyo R888
3/8" Wheel Spacers All Around

Body Mods
03-04 Cobra Front Bumper & Sideskirts
Saleen 3 Piece Wing
Smoked Headlights & Foglights
HID Headlights & Foglights
LED Switchback Front Blinkers (Amber/White)
1" Shaker Spacer
Mach 1 Fuel Door
8" Antenna
5% Tint

Interior
Autometer Cluster Gauge Pod
Autometer Column Gauge Pod
All Lights Replaced w/ White LED's
MGW Cigarette Lighter
MGW E-brake Handle
Mach 1 Floor Mats
Mach 1 Brushed Aluminum Door Sill Plates

MISC.
Optima Billet Battery Tray and Cover (Engraved w/ "mach 1")
Optima Red Top Battery
SLP Line Loc
LED Backup Lights
LED Taglights
MRT Hood Struts
MGW Mach 1 Oil Cap
Clifford 10.5x Alarm System



machattarget.jpg


irsmach.jpg


intercooler.jpg


photo2.jpg


photo1.jpg


tubularfrontend.jpg


midpipe.jpg


rearunderside.jpg


machmotorbuild.jpg


dampnerandthumprrr.jpg


foreinnovations.jpg


forehat.jpg


kmember.jpg


irscoilovers.jpg
 
Last edited:

JetmechF16

Under Pressure
Established Member
Premium Member
Top Shelf Gentlemen
Joined
Sep 14, 2006
Messages
3,980
Location
Huffman, TX
Damn that is the baddest Mach 1 I've ever seen!

Built motor - check
Procharger - check
T56 - check
IRS - check

Perfect combo! Do you think that motor can support an F1A and more boost (around the 800 rwhp level)? I've never seen someone use the 3v WAP block in a build before, what is their power limit?

I want to do a Mach 1 big centri build with Cobra goodies but it looks like yours is already setup! Interested in any trades?
 

medrick

Member
Established Member
Joined
Jul 24, 2008
Messages
309
Location
Tulsa, Oklahoma
Thanks!

Yeah it will definitely support that. 3v blocks are supposed to be as strong if not stronger than a teksid. I built it to support 1000, the block and internals are all good for it.

F1 or heads and cams was my next step.

Possible trades
08 + Crew Cab F250/350 Diesel
09+ Crew Cab F150
99 + Lightning
13 + 5.0 Mustang
05 + Vette
 

Dusten

Well-Known Member
Established Member
Joined
Jan 20, 2006
Messages
14,926
Location
Conway, Wa
Thanks!

Yeah it will definitely support that. 3v blocks are supposed to be as strong if not stronger than a teksid. I built it to support 1000, the block and internals are all good for it.

F1 or heads and cams was my next step.

Possible trades
08 + Crew Cab F250/350 Diesel
09+ Crew Cab F150
99 + Lightning
13 + 5.0 Mustang
05 + Vette

To bad my truck isn't worth a bit more.
http://www.svtperformance.com/forums/sn95-cobras-409/956361-wtt-2001-lightning-96-mystic.html
 

dsg03bullitt

New Member
Established Member
Joined
Sep 25, 2006
Messages
758
Location
mississippi
Good lord I wish this car was in my price range. I'd buy it this weekend lol. Looking for a mach like this ASAP. Cash in hand
 

Users who are viewing this thread



Top