Built 4v Motor/Trans Part Out

4OCIUS4V

BOOST Junkie!!!!
Established Member
Joined
Jul 13, 2006
Messages
344
Location
HOB
I am selling the drivetrain out of my 98 cobra. Almost everything was bought brand new and has very low mileage. I have put 9k miles on this combo and everything works and runs great. All powdercoating was done at time of build. I still have the motor in the car and daily drive it. I will be pulling the motor next weekend. Here is a list of all the parts for sale. Prices do not include shipping.

98 Cobra Teksid block (57k miles) $400
- Bored .020" over with all new freeze plugs
- Comes with rear main cover and windage tray


Kellogg Forged Crank (9k miles) $400


Manley Platinum H-Beam Rods with ARP2000 (9k miles) $450


Manley Platinum Pistons -11cc dish .020" over (9k miles) $400
- Comes with ring set and pins
- No grinding done. All weight was taken out of crank


Innovators West 10% Overdrive Balancer (9k miles) $250


New Cobra Oil Pump with Triangle Speed Shop Billet Gears (9k miles) $250


New Billet Crank Trigger Wheel (9k miles) $100


2004 Mach 1 nine thread Heads (23k miles) $800
- 5 angle valve job done at 14k miles - comes with chains, guides, tensioners.
- Also comes with coolant crossover mod


2001 Cobra Intakes powder coated bright silver and black (39k miles) $400
- Comes with throttle body and misc brackets


Centerforce DFX 11" Clutch Kit 10 spline (9k miles) $150


Spec Billet Steel Flywheel (9k miles) $150


1998 Cobra Timing Cover powder coated black $125
- Comes with tensioner and pulleys


1998 Cobra Coil Brackets powder coated black $75


1998 Ignition Coils $50


MSD Spark Plug Wire Set - Red (9k miles) $75


2004 Mach 1 Valve Covers powder coated bright silver $150


2001 Cobra Waterpump (39k miles) $75
- Comes with pulley


Complete Oil Cooler Assy (9k miles) $175
- Does not fit 03-04 Cobra with factory alternator location


1998 Cobra Alternator powder coated black (57k miles) $100
- Comes with pulley


96-98 Aeromotive Fuel Rails (9k miles) $150


1998 Cobra Coolant Crossover $60


1998 24lb Injectors (57k miles) $100


MMR Deep Race Oil Pan - Black (9k miles) $150
- Has been modified with skid plates because it hands low


1998 Ford T-45 Transmission (57k miles) $200
- Shifts perfect


MGW Orange Handle Shifter T-45 with billet knob (9k miles) $100


ARP Main Studs 12 point (9k miles) $75


ARP Head Studs 6 point (9k miles) $100


I'll update this thread if I come up with anymore parts


Shortblock1.jpg


Shortblock2.jpg


Engine1.jpg


Engine2.jpg


Crossover1.jpg


Cobramotor-1.jpg


DSCN5684.jpg
 
Last edited:

rtusnake

Active Member
Established Member
Joined
Jul 20, 2004
Messages
1,822
Location
Lincoln, AL
I will take the heads if you do part the motor out. I will also take the balancer, and arp main and head studs
 
Last edited:

4OCIUS4V

BOOST Junkie!!!!
Established Member
Joined
Jul 13, 2006
Messages
344
Location
HOB
You'll need the flywheel because the factory only accepts a 10.5'' disc and this an 11''.
 

4OCIUS4V

BOOST Junkie!!!!
Established Member
Joined
Jul 13, 2006
Messages
344
Location
HOB
How much for the motor??

$5000 for the motor. $5500 complete with trans and clutch assembly. It does have some piston slap because the machine shop didn't listen to my piston to wall clearance. I set them up pretty tight but since I told him it was going to be a twin turbo motor he set it up really loose for piston growth under high heat. It runs like a champ but I want to be up front that it does have some piston slap. If anything you can put everything into another block with the correct sizing.
 

Users who are viewing this thread



Top