MOTOR SOLD!!!
Used not abused fully built Ford Mustang V8 motor...
First and fore most I WILL NOT PART THE MOTOR OUT....
Please, please, please serious buyers only.
$2,800.00 OBO
For sale long block....
4.6 stroker short block(which makes it a 5.0!!) w/CP pistons, Moly rings, 4340 H-Beam rods, King rod & main bearings.
Compression is about 9-1 or 9-2
26113-16- valve springs
792-16- vbs valve spring retainers
HS 9790 PT16-fel Pro head set
m6600-d46- HIGH volume oil pump
Stock 2v heads ported and polished and valve job
156-4101 ARP studs
The Motor has been cleaned, wrapped and stored in a climate controlled storage.
The short block alone brand new is worth about $4,400 add the stroker and the CNC ports and you have well over $5,500 closer to $6,000!!
Buyer responsible for shipping.
I am the second owner of the motor. I purchased it directly from the original owner. The motor is about 4 1/2 years old and has around 15k-20k miles and from me has about 8 passes down the track. This motor ran strong and flawlessly all the way till the day I took her out of my car. I wanted to go a different direction with my car so I built something different. Here is a video of the last time the motor was on the car and on the dyno. as you can see and hear....strong all the way through.
Motor is rated at 1200hp!
2004 Mustang GT supercharged by Tork Tech Built by Mustang Specialties - YouTube
Here are a few pics
Not for nothing but danm those are some beautiful cylinders!!!!
Used not abused fully built Ford Mustang V8 motor...
First and fore most I WILL NOT PART THE MOTOR OUT....
Please, please, please serious buyers only.
$2,800.00 OBO
For sale long block....
4.6 stroker short block(which makes it a 5.0!!) w/CP pistons, Moly rings, 4340 H-Beam rods, King rod & main bearings.
Compression is about 9-1 or 9-2
26113-16- valve springs
792-16- vbs valve spring retainers
HS 9790 PT16-fel Pro head set
m6600-d46- HIGH volume oil pump
Stock 2v heads ported and polished and valve job
156-4101 ARP studs
The Motor has been cleaned, wrapped and stored in a climate controlled storage.
The short block alone brand new is worth about $4,400 add the stroker and the CNC ports and you have well over $5,500 closer to $6,000!!
Buyer responsible for shipping.
I am the second owner of the motor. I purchased it directly from the original owner. The motor is about 4 1/2 years old and has around 15k-20k miles and from me has about 8 passes down the track. This motor ran strong and flawlessly all the way till the day I took her out of my car. I wanted to go a different direction with my car so I built something different. Here is a video of the last time the motor was on the car and on the dyno. as you can see and hear....strong all the way through.
Motor is rated at 1200hp!
2004 Mustang GT supercharged by Tork Tech Built by Mustang Specialties - YouTube
Here are a few pics
Not for nothing but danm those are some beautiful cylinders!!!!
Last edited:
