Up for sale is the piston/rod combo that I pulled out of my brand new aluminator short block. These are a 3.552 bore and 8.5:1 compression. Manley H beams and Mahle pistons. Time and time again these pistons and rods have proven themselves in 700+ hp cars. The only thing needed are some rod bolts. Stock these come with arp....however not the 2000's which are the rod bolts that should be used in any rebuild. Call/txt is the best way to get a hold of me for fast communication. 734-931-2121 Asking $750 for everything. Also have a brand new stock 03/04 cobra oil pump as well.
Brand New Manley H-Beams & Mahle Pistons
- Thread starter gimlach94
- Start date
I always wondered if the aluminator had the same rods as the Cobra. Now I know. Cool. GLWS
Grant is a good dude guys!
Thanks brother. Same to you.
Yep same rotating assembly just different block. One of the best production modular blocks ford ever produced.
so looking at my "Haynes" manual it says my stock bore is 3.5539-3.5544.
I have 2003 4.6 2V
I have a piston with low compression.
Will these still work?
I have 2003 4.6 2V
I have a piston with low compression.
Will these still work?
never bored
just worried I may need to shave some due to possible scoring from bad rings
would u accomedate a Canadian buyer, and use a money order for payment?
just worried I may need to shave some due to possible scoring from bad rings
would u accomedate a Canadian buyer, and use a money order for payment?
I looked at usps website says medium sized box
USPS-Produced Box: 13-5/8" x 11-7/8" x 3-3/8" or 11" x 8-1/2" x 5-1/2"
Maximum weight 20 pounds.
May have to ship in two boxes but no bad at $40 ish per box.
And I should be able to do a western union money order to you if that is ok
USPS-Produced Box: 13-5/8" x 11-7/8" x 3-3/8" or 11" x 8-1/2" x 5-1/2"
Maximum weight 20 pounds.
May have to ship in two boxes but no bad at $40 ish per box.
And I should be able to do a western union money order to you if that is ok
parts
sent you a pm
sent you a pm
k sorry I don't have paypal
How to Receive Money
Make sure you know the money is ready before you try to pick it up. You can do this by contacting the sender, or you can check the status of your money transfer if you know the Money Transfer Control Number (MTCN).
STEP 1: Visit an Agent location
Visit a nearby Western Union Agent location.
STEP 2: Complete the "Receive Money" form
Fill out the required information on the form:
First and last name of the sender City and country the money was sent from
Amount
Money Transfer Control Number (MTCN) if required
STEP 3: Show your ID
Present the completed form and a valid government-issued photo ID to the clerk at the Agent location.
STEP 4: Receive the Money and Receipt
Collect money and receipt from the clerk. It's that easy.
Make sure you know the money is ready before you try to pick it up. You can do this by contacting the sender, or you can check the status of your money transfer if you know the Money Transfer Control Number (MTCN).
STEP 1: Visit an Agent location
Visit a nearby Western Union Agent location.
STEP 2: Complete the "Receive Money" form
Fill out the required information on the form:
First and last name of the sender City and country the money was sent from
Amount
Money Transfer Control Number (MTCN) if required
STEP 3: Show your ID
Present the completed form and a valid government-issued photo ID to the clerk at the Agent location.
STEP 4: Receive the Money and Receipt
Collect money and receipt from the clerk. It's that easy.
But ya I think Ill pass anyway
Just really concerned that my walls will be scored and ill have to bore to much to use these.
Probably just have to go MMR set
Thanks though
Just really concerned that my walls will be scored and ill have to bore to much to use these.
Probably just have to go MMR set
Thanks though
Users who are viewing this thread
