I installed some springs, LCA brackets, panhard bar today and noticed the rear brake lines are ran through the LCA so when I installed them into the relocation brackets it put some tension on the brake lines. I have a '14 GT with brembo package (gt500 LCA) and used Whiteline LCA brackets, do you guys think they may cause future issues?
Brake line fed through the LCA?
- Thread starter twistid
- Start date
I used the BMR LCA's and fed them through the LCA's but they did not create tension on them.
If there is not enough slack.....You need to disconnect the parking brake cable from the rear calipers and reroute the cable so they lay on top of the LCA, not through the hole.
Last edited:
You don't have to bleed... It is a T toped cable that you pop up and turn and it pulls out. Then you reverse to put it back.
No bleed, the parking brake is cable, not hydraulic. Pull the retaining clip and remove it.
Users who are viewing this thread
