I was installing the boss intake manifold yesterday and when I was almost finished I realized that it wasn't lining up correctly its the stock air box. I don't know if it was just me but I didn't know that the boss manifold didn't work with the stock air box and I don't want to go with an aftermarket one so I figured I would try to make an adapter with a buddy of mine. The angle was a little off but we rotated the intake tube clockwise about a quarter turn so it lined up a little more with the throttle body and it was about 2 inches short of reaching. And also the PCV valve was about 1.5 inches from reaching the intake tube. We bought a 3 inch PVC pipe and 3 inch rubber tubing from home depot and created a an adapter and replaced the normal PCV valve and plastic hose with a 1/2" fuel line. It cost 13$ total and I think it looks pretty good. Let me know what you guys think.
Here is a picture of the final product
Here is a picture of the final product