BMR UTCA038 Sneak Peek!

[BMR Tech 2]

I wanted to drop in and show everyone what we've been working on over here at BMR. Our current UTCA033 is the baddest S197 UCA available, but we wanted to bring a spherical upper to the table that was a little more economical. Our latest UCA for the S197 features 1" rod end vs. the 3/4" or 7/8" commonly found in other UCA offerings on the market. Wanting to design the strongest parts we could, we chose the 1" rod end to avoid failures that we've seen with 3/4" and some 7/8" bearings on higher HP cars. Our design team also got to work designing an adjuster that is unique to BMR. The adjuster is a CNC chrome-moly telescoping design that allows the adjuster to be more compact compared to other adjusters. We're really thrilled with this design of this UCA and think that heavy hitters looking to make the jump from poly to spherical will be thrilled with the strength and value this arm offers!


This is the UTCA038:

This is what your typical 3/4" rod end UCA looks like:

UTCA038 next to a 3/4" rod end UCA:

Adjuster pics:

 

[Thalilbear02]

Always coming out with good stuff!

 

[stangn]

Nice piece of work. What about adding dust boots to the package?

BMR makes the best designed and tested suspension parts.

 

[BMR Tech 2]

Always coming out with good stuff!

Thanks!

Nice piece of work. What about adding dust boots to the package?

BMR makes the best designed and tested suspension parts.

Thank you!

Dust boots shouldn't be necessary on the UCA. It's fairly well protected from the grit and grime the LCAs get blasted with.

 

[BMR Tech 2]

Sneak peeks are done!

UTCA038 is available on the site and ready for order. We are currently building them, so there might be a slight delay in shipment.

http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&maincatid=21&catid=71&productid=1690

 

[GBCoyote]

Came just in time for me to upgrade. Thanks!