Yes it does.Dumb question, does this unit use the stock style rack bushings?
Yes it does.Dumb question, does this unit use the stock style rack bushings?
Thank you. Need to add that to the shipping list.Yes it does.
Grab them from amazon. Poly offset bushings for like $15 shipped. I use offset because my ebay longtubes didn’t play nice with my steering shaft. Standard poly would be fine otherwise.Thank you. Need to add that to the shipping list.
I ordered a set from LMR. Figured I'd support a vendor.Grab them from amazon. Poly offset bushings for like $15 shipped. I use offset because my ebay longtubes didn’t play nice with my steering shaft. Standard poly would be fine otherwise.
You are supposed to use your stock bolts. I already had an aftermarket K that required their own special bolts that didn’t work with the BMR or any other K so I bought some grade 8’s from Ace Hardware to use.I ordered a set from LMR. Figured I'd support a vendor.
Since I have your attention, did you reuse the stock control arm bolts or does BMR include new bolts?
I don’t believe so. If they have the small hole like the steeda, they will not.Will the MM aluminum rack bushing for a stock k-member work? I assume they will
I had a feeling that was the case. I need to order new tie rod ends too. So I'll just get a shopping list together.You are supposed to use your stock bolts. I already had an aftermarket K that required their own special bolts that didn’t work with the BMR or any other K so I bought some grade 8’s from Ace Hardware to use.
I ordered my replacements today. I think Steeda makes an aluminum bushing for the stock set up.Damn, back to stock style poly.
My thread is listed on the first page of this thread on here with tons of installed photos...My question is has anyone installed one yet on here?
Do they accept after market motor mounts? I heard rumors of them not clearing 1-7/8th longtubes also.
I was told today that my KM744 should ship around August 17. Ordered on July 10.When I ordered mine last week the sales guy, Dion, said that they had issues getting raw material due to Covid but that they had just received a couple of shipments and they are now flush with steel. I was told that my K-member should ship at the of the of the month.
I ordered mine over Memorial Day weekend. I canceled my order July 23rd or 23th because they couldn't get me an idea for a ship date. And I'm out of the return window for the control arms that I have no need for. Although I think I should get some forgiveness on that since it's their fault I'm out of that window.I was told today that my KM744 should ship around August 17. Ordered on July 10.