Blown Engine!

[fast_cobra_r]

What should I do? Bore and storke my engine or buy a new 03/04 cobra engine? If the swap is done is there anything else I need to take in to consideration? Thanks in advance.

 

[97snaketrplB]

Depends what was damaged.

 

[SPEEDRACER88]

Get the Cammer 5.0 engine

 

[06RustangKiller]

Buy an LS7 motor

 

[rangerob]

I 2nd the LS7 motor!!!

 

[LIGHTNING LARRY]

What should I do? .

You should try using the correct forum!


MOVED! :wf: :wf: :wf:

 

[RRRR03Cobra]

Buy an LS7 motor

Try using the correct site!LOLOLOOL :bash:


As far as the engine goes, what was damaged?? Give us a little info on what was damaged and you will get your answers. You will gain a little displacement by boring the cyclinder walls. You could go .30 over with some really good pistons, rods, bearings, etc.. D.S.S. and VT engines is a good place to start. They have overhaul kits for our cars. If you build a really good bottom end, you won't have to worry about blowing it up again (unless you do something crazy). Good luck! :beer:

 

[Quadcammer]

dss is shit for mod motors, and .030 is the service limit of the aluminum block. .020 over is where you want to start. If it cleans up there, don't go the extra .010

 

[UCBeau]

put a chevy 350 in it

 

[99flblackcobra]

Forge it and up the boost.

 

[torquemonster]

i like the ls7 idea...but thats cuz i was at alms watching corvettes this weekend, i have a little corvette fever....but ya ls7 or rebuild...