Black KB 2.2L

[builtarmyofone]

This is the older design with the catch can. I do have a Accufab TB that goes with it if buyer wants. Blower made 590rwhp and 640rwtq on the 2.75" pulley with 8# lower. Blower will come with the 2.75" and 3.25" pullies. Price is $2100 for blower or $2300 for blower with TB. Blower was just gone through at KB and had the snout rebuilt so there is no issues with blower.

 

[builtarmyofone]

ttt

 

[fiveoh2go]

Just to clarify, when KB went through the blower to freshen it up did they put the upgraded snout on it or does it still retain the original that needs the catch can?

 

[builtarmyofone]

it still has the catch can on it. They replaced the bolt that holds the coupler on and made sure everything else on the snout was good

 

[Fat-cat]

2.76 upper and 8 pounds lower... thats like 25 psi

 

[mike302]

Why so little power with a 2.75/8 Lower???

 

[emerica4601]

should be more like 615-630rwhp on that pulley setup. maybe its all in the tune ..

ttt for a nice blower

 

[mike302]

nice torque Tho!

 

[Soundfx007]

No wonder you had to rebuild it. Max rpm on that blower is 18,000. With that combo your spinning it 25,000 at 6.5k.

I made 24psi with a 3.25 and a 6lb lower.

 

[terminutter03]

No wonder you had to rebuild it. Max rpm on that blower is 18,000. With that combo your spinning it 25,000 at 6.5k.

I made 24psi with a 3.25 and a 6lb lower.

really??? why would they design a 2.50 pulley then???:shrug:

 

[builtarmyofone]

Yeah, Im pretty sure I maxxed out the blower. Was not looking to make record breaking numbers with 15 degrees of timing on 91 octane in the dead heat of summer. Have pics available upon request

 

[Nastystang]

Pics please i can prob do like 1800

 

[Soundfx007]

really??? why would they design a 2.50 pulley then???:shrug:

Maybe because not everyone has an 8,6,4, or 2 lb lower? :shrug:

 

[builtarmyofone]

ttt. pic added

 

[jason kaster]

Kenne Bell

Does the catch can have to be on the blower?

 

[builtarmyofone]

yes, catch can has to be on blower, unless you want KB to upgrade to the newer snout

 

[builtarmyofone]

ttt. all PMs answered

 

[builtarmyofone]

ttt. price reduced $100

 

[builtarmyofone]

ttt. $2000 for the blower

 

[z-eater]

PM sent