Black 04 Cobra detail product?

[Venom04]

I was using the poorboys ssr line with portal cable with pretty good results. Noticed some marring during the ssr stages. Seemed like I had to work a little hard to get rid of them with glazes and wax afterwards. What products are best for black with a porter cable?

 

[MattZ28]

This is typical of the SSR polishes...do yourself a favor and pick up some Menzerna PO85RD and a couple Crimson Hydro-Tech pads.

Menzerna PO85RD Micro Polish SF4500 - Compounds and Polishes - Car Care Products

Lake Country Hydro-Tech Low Profile 5 1/2" x 7/8" Pads - Buffers, Pads and Accessories - Car Care Products

Use it on speed 6 with moderate pressure, working a 1.5 square foot area at a time, moving the polisher about 1 inch per second. Keep overlapping and after several passes, once the polish begins to turn translucent, bump it down to speed 5 with light pressure for a few passes. You will be left with a perfect finish. From there, you can go to your choice of sealant/wax. :beer: